K-Tuned K20 Upper Coolant Housing w/ Filler 16AN Fitting
- K20A cylinder heads
- K20A2 cylinder heads
- K20A3 cylinder heads
- K20Z1 cylinder heads
- K24A1 cylinder heads
* Does NOT fit with the PRB manifold and throttle bodies with cruise control
* Rad cap is not included
a -16OR (O-Ring) Outlet and a -12OR (O-Ring) Filler Inlet
We've taken input from guys running big turbo setups on this one. The integrated filler now clears up more room for big turbo setups. The filler neck comes off the top of the housingand can be used to relocate the radiator cap to a higher point on the engine itself. The new location is the highest point of the cooling system and allows air pockets to easily escape during the coolant bleeding process. The Filler Neck is also available with standard 1.25" hose or in 12AN and 16AN sizes and was designed for use with an OEM 92-00 Honda Civic radiator cap. This part will be very helpful on an engine that already has a bad reputation for coolant bleeding.
The K-Tuned Upper Coolant Housing will compliment our Swivel Neck Thermostat and our Water Pump Block off Plate. All of these parts allow plenty of options for custom and race engine cooling setups.